막구조 정착부의 볼트접합부 막재료의 신장 및 파단상태를 통한 응력전달체계에 관한 연구

서지정보

· 발행기관 : 한국공간구조학회
· 수록지 정보 : 한국공간구조학회지 / 23권 / 4호
· 저자명 : 김희균, 심천보, 김재열

목차

1. 서론
2. 정착부 인장실험
2.1 실험 개요
2.2 정착부 시험체의 1축 신장특성
2.3 정착가공부의 신장특성
2.4 볼트조임 토크의 파단성상에 대한 영향
2.5 정착부의 막재료의 파단강도와 인장강성
2.6 볼트정착부의 파단성상
3. 결론
감사의 글

영어초록

The membrane structure should maintain the membrane materials in tension for structural stability guaranty. The anchoring part in the membrane structure is an important part. It has the function to introduce tension into membrane materials and function to transmit stress which membrane materials receives to boundary structure such as steel frames. In this paper, it grasps anchoring system of the anchoring part in the membrane structure concerning the fracturing characteristic condition of membrane structure, and the influence which is caused to yield it designates the stress state when breaking the membrane structure which includes the anchoring part and that stress transition mechanism is elucidated as purpose. This paper follows to previous paper, does 1 axial tensile test concerning the bolting part specimen, grasp of fracturing progress of the bolting part and the edge rope and hardness of the rubber, does the appraisal in addition with the difference of bolt tightening torque. As a result, the influence which the bolt anchoring exerts on the fracturing characteristics of the membrane material in the membrane structure anchoring part is examined.

참고자료

· 없음